I have a DL380 G4 w/Netware 6.5 sp5 installed. I use Arcserve 9.01 with a Ultrium 460 external tape backup. Everything has been working fine however my backups now require 2 tapes. I have a second Ultrium 460 that I would like to add to the backup that will hold my second tape. I daisy chained my tape drives (SCSI IDs 3 and 4, properly terminated). The drives are recognized during the initial scan for SCSI devices. The drives also show in Novell however show as unbound devices with list devices. When I start Arcserve it will not complete the load saying that I have a SCSI error. Any ideas or suggestions are greatly appreciated.