I have installed 3.9 twice now which has abended on each occasion, I am
usng a clean install of 65sp6.
Firstly 3.9 can't create all of the traditional volumes, it can only
create 3 out of the 4 I requested (on a second physical disk), secondly
during the install the bordermanager install window disappears and abends
the server. This is after I have told it what filders i need etc. The
abend is before the licences are installed as there are none in the ou.

As this has happened twice now, I am thinking it can't be me causing the
problems (can it!).

-Logs below-

Any ideas

Ian Meaton


Abend log (snip)
************************************************** *******
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.06

Server H27 halted Friday, 4 May 2007 2:29:32.193 pm
Abend 1 on P00: Server-5.70.06-1937: CPU Hog Detected by Timer

Registers:
CS = 0060 DS = 0068 ES = 0068 FS = 007B GS = 007B SS = 0068
EAX = FBF17BC3 EBX = 97B4D220 ECX = 00000003 EDX = 9AA56E1C
ESI = 9CAA3BE2 EDI = 9CABF696 EBP = 9AA56268 ESP = 9AA56244
EIP = 00000000 FLAGS = 00000046


Running process: NWConfig Process
Thread Owned by NLM: NWCONFIG.NLM
Stack pointer: 9AA56CB8
OS Stack limit: 9AA46EE0
Scheduling priority: 67371008
Wait state: 3030070 Yielded CPU
Stack: --FBF17BC3 ?


Install Log
--
, Install Summary, , , The Install Troubleshooting Guide is available at
http://www.novell.com/documentation/lg/nbm39
No., Install Step, Status, Cause, Link to see in TroubleShooting Guide for
Workaround
1, Performing Minimum Requirements Check, , ,
, NetWare 6.5.6, OK, ,
, NICI 2.7.0, OK, ,
, eDirectory 87.3.9, OK, ,
, LDAP 87.3.9, OK, ,
, Novell BorderManager - , OK, ,
, PKI 3.2.0, OK, ,
, SAS 1.7.5, OK, ,
, NETNLM32.NLM 6.0.6, OK, ,
, iManager 2.6.0, OK, ,
, TCP.NLM 6.91.1, OK, ,
, TCPIP.NLM 6.91.3, OK, ,
, BSDSOCK.NLM 6.91.1, OK, ,
2, Performing License Selection Validation, OK, ,
3, Extending Schema for Firewall Services, OK, ,
4, Installing iManager snap-ins for Firewall, OK, ,
5, Installing iManager snap-ins for Proxy Services, OK, ,
6, Installing iManager snap-ins for Access Control Lists, OK, ,
7, Migrating Filters to eDirectory, OK, Error loading Start Proxy and ACL
Configuration Migration,
7, Performing Filter Configuration, , ,
, Setting Default Filters, SKIPPING, Setting is done only if Interface is
Public and not Private, Troubleshooting Guide > Install > Filter
Configuration.
, Making Interface(s) public, OK, ,
, Setting Default Filters, OK, ,
, Enabling Packet Filtering, OK, ,
8, Creation of Volume to use for Caching, , ,
, Creating new Partition, OK, ,
, Creating new Volume(s), WARNING, Number of Volumes actually created :3,
Run the standalone Volume Creation Utility.For details see Troubleshooting
Guide > Install > Cache Volume Creation.
, Writing Cache Volume Information to eDirectory, OK, ,
9, Updating Proxy/Firewall/Filter/Acl Configuration to eDirectory, , ,
, Adding IPX/IP Gateway class and attributes to eDirectory Schema, OK, ,
, Writing Public and Private IP Address list to NCP Server Attribute, OK,
,
, Writing Event Logging Rules to eDirectory, OK, ,
, Writing Timestamp Values, OK, ,
, Setting Access Control Flag, OK, ,
, Setting Gateway Port Value, OK, ,
, Setting Proxy Parameters, OK, ,
10, Migrating Filters to eDirectory, OK, Error loading Start Proxy and ACL
Configuration New Install Migration,
**ends