Hi All,

we have a dual boot imaging.

under ZEN 7sp1 IR3 on Netware

At the end of the build we were able to

sda2 has Linux installed

#create device.map - Allows for multi disk PCS
echo | grub --no-floppy
mount /dev/sda2 /mnt/harddisk
cp /boot/grub/device.map /mnt/harddisk/boot/grub/device.map
##tell grub linux is on the first drive
sed -i s/hd1,1/hd0,1/g /mnt/harddisk/boot/grub/menu.lst
##default boot to windows
sed -i /default/s/0/1/ /mnt/harddisk/boot/grub/menu.lst
grub-install --root-directory=/mnt/harddisk /dev/sda
umount /mnt/harddisk

The problem we have under ZEN 7SP1 IR4 on OES Linux
/boot is mounted as a loopback device. Therefore it is read only.

Can anyone suggest a way to update grub whilst still in the imaging
engine. We now only have single disk PCs with

sda1 = windows
sda2 = linux

sda1 = windows
sda2 =

sda1 =
sda2 = linux

Also previously we used lilo.s to remove grub, this would allow non
Linux machines to boot. However it appears we can't run lilo any more.

Thanks for any help