Hi folks, I'm new to the support forums. We recently applied SP7 to our two NW65 servers (previously we were on SP3). One of them has Arcserve 11.1 SP3 for Netware loaded and it is the one having serious memory issues. Prior to Arcserve running our weekly backup, total cache buffers size was 300K+. When I checked this morning, it was down to 120K & dropping (yes, the backup had completed successfully & not running any longer). The application of SP7 itself went very smoothly & I am bewildered by the drop in memory after running Arcserve. Below are our bti.cfg & tsa.cfg files in hopes that someone could recommend any changes to it to resolve this issue. Yes, we are running Btrieve 8.50.

Thank you very much for any tips/suggestions/help you can provide!
__________________________________________________ _______________

BTI.CFG

[InstallInfo]
InstallDir=F:\PVSW\
SystemDir=F:\SYSTEM\
InstallIniName=PTKSETUP.INI
VersionLevel=8.50
PatchLevel=0
BuildLevel=189

[NetWare Patches]
Btrieve=7 3 112
DOCS=7 3 112

[Database Names]
DBNamesDirectory=SYS:/SYSTEM

[MicroKernel]
MaxFiles=250
MaxCursors=200
BalancedTrees=NO
ForceFileVersion=0700
SystemData=YES
MaxDatabases=10
Logging=NO
CacheSize=256000
CompressedBufferSize=5
ExtendedBufferSize=16
MergeSortBufferSize=0
MaxRecSize=16
CachePartitioning=NO
TransDurability=YES
TransLogBufferSize=1024
TransLogFileSize=1024
SysTransBundleLimit=1000
SysTransTimeLimit=10000
MaxClients=120
BackgroundThreads=25
WaitLockTimeout=30
TransLogDirectory=SYS:/SYSTEM/MKDE/LOG
WorkDirectory=
Trace=NO
TraceFile=SYS:/SYSTEM\MKDE.TRA
TraceDataBufferLength=32
TraceKeyBufferLength=32
TraceOpsList=ALL
LoadRouter=NO
RouterCommBufferSize=16
RuntimeServerSupportMode=0000
MaxCacheUsage=20
TransLogging=YES
Validate Request=NO
Max Pending IO=1024
File Growth Factor=15
Page Server Allow Client Cache=YES
Prompt For Client Credentials=NO
Allow Client-Stored Credentials=YES
Use FileIO Mutex=NO

[Btrieve Interface]
Embedded Spaces=NO

[Btrieve Communications Manager]
MaxWorkerThreads=25
MaxRecSize=16384
MaxClients=120
MaxReceivePacketSize=1500
Use SAP=AUTODETECT
Supported Protocols=SPX,TCPIP
Listen IP Address=
TCP/IP Multihomed=YES
Enable AutoReconnect=NO
AutoReconnect Timeout=180
__________________________________________________ _______________

TSA.CFG

Read Buffer Size:
65536
Read Threads Per Job:
4
Read Thread Allocation:
100
Read Ahead Throttle:
2
Cache Memory Threshold:
10
Disable Cluster:
no
Enable GroupWise:
0
Enable Caching:
yes
Disable Demigration:
no
__________________________________________________ _______________