Can anyone give me the syntax to add to the netinfo.cfg file to enable jumbo frames for this server. I have read in other forms that you just enter

jumbo=9000 or what ever size you are setting the jumbo frames for.

I need some help with exactly where it goes and will it work for the HP dl360 G5 NICs?

Here is what my netinfo.sys looks like. The ISCSI NIC is the 10.10.10.201. Does jumbo=9000 go after the bind statement? as part of the bind statement?

I am sure this is newb stuff by I would greatly aprreciate the help.

#!VERSION=2.3
#!
#! --- WARNING -- WARNING -- WARNING -- WARNING -- WARNING -- WARNING -------
#! This file was created by a configuration utility (INETCFG.NLM or
#! INSTALL.NLM). It is intended to be modified only by a configuration NLM.
#! Tampering with this file may cause severe malfunctioning of the system.
#! The configurator will check for tampering and abort if it is detected.
#! --------------------------------------------------------------------------
#!
#!SERVERTYPE=NORMAL
#!
#!UIMODE=NORMAL
#!
#!BEGINGENLOAD
LOAD SNMP
LOAD BCALLSRV
#!END
#!
#!BEGINTSMLOAD
#!END
#!
#!BEGINBOARD DRVR=BX2 NAME=BX2_1_EII STATUS=ENABLED NUMPORTS=1 DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=10029
#
#!BEGINPORT NAME=BX2_1_EII NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=0 MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#
#!REFCOUNT=1
LOAD BX2 NAME=BX2_1_EII_EII FRAME=Ethernet_II SLOT=10029
#!END
#!END
#!
#!BEGINBOARD DRVR=BX2 NAME=BX1_EII_2 STATUS=ENABLED NUMPORTS=1 DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=10031
#
#!BEGINPORT NAME=BX1_EII_2 NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=0 MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#
#!REFCOUNT=1
LOAD BX2 NAME=BX1_EII_2_EII FRAME=Ethernet_II SLOT=10031
#!END
#!END
#!
#!BEGINPROTO PROTO=TCPIP STATUS=ENABLED
LOAD TCPIP
#Transferred from AUTOEXEC.NCF
#!BEGINBIND STATUS=ENABLED
BIND IP BX2_1_EII_EII ADDRESS=10.1.1.100 MASK=255.255.255.0
#10.1.1.100
#!END
#!BEGINBIND STATUS=ENABLED
BIND IP BX1_EII_2_EII ADDRESS=10.10.10.201 MASK=255.255.255.0
#10.10.10.201
#!END
#!END