Ok, I use basic nat all the time, but have never tried this and wanted
to
know if it's possible.


Bm box has 2 nics.

1 public and 1 private.

The private nic is 192.168.150.253

I have a static nat setup where a public ip is assigned to
192.168.150.252
for email. Works fine.

There are multiple private networks at this location. The gateway of
the
private nic is 192.168.150.254 which is a layer 3 switch. One of the

ports on that switch is 10.33.49.254.

Can I add another static nat entry so that a public ip is assigned to

10.33.49.100?

In other words, does static nat only work with the ip segment that is
on
the BM box? or can it static nat multiple segments or hops away?

Thanks.