Hi,

We have a Terminal Server setup on our local LAN at an address of
10.2.1.99. The address thru NAT is something like 99.99.99.91. Everything
was working fine. We had two subnets 10.2.0.0/24, and 10.2.1.0/24. We then
combined the 2 subnets into 10.2.0.0/23. We then changed the local IP
address of the Terminal Server to 10.2.0.99. Changed the entry in NAT to
reflect the change, but we can no longer get to the Terminal Server from the
outside. Changing the address of the Terminal Server back to 10.2.1.99
doesn't work. We can connect to it over the LAN, and the BorderManager
Server is able to ping the new address. Any Ideas what might be wrong?

We are running NetWare 6.0 SP3, and BM 3.7 SP2.