We got a new block of 10 ip addresses from our ISP. The five we had were
not enough. We are no longer using the original five. I binded the new IP
address to the public interface and put in the public to private addresses
in the NAT table but it won't let me add the public addresses into the
secondary IP table. It gives me an "illegal address" message. It worked
fine before, only thing different other than the new ip addresses is the
new block is on a different subnet than the original five. The BM server
hits the internet just fine. Tried adding the secondary address from a
console prompt and got an error. NAT is set up for static and dynamic. Any
insight would be greatly appreciated.