Hello,
here is a problem that is driving me crazy. We have a specialized app
that
needs to talk to a server in another town. The software requires tpc
and
udp on port 510, the other default ports are listed as "proxy port
1080" and
"proxy ip address 0.0.0.0"
When I remove all filters at the server and point it to 0.0.0.0, it
works
fine. But with the default BM filters in place, plus the ones listed
below,
it will not work. I've tried pointing it to our default gateway of
192.168.0.2 with no luck.

the funny thing is, once I connect without the filters in place, and
then
reinit the filters, it still works until I reboot the workstation.
This is
BM 3.5 on a NW 4.2 server. Workstation has win2k, novell client 4.83
sp1

thanks in advance for any help!
-Bill

Filter One:

source interface type: interface
source interface: all interfaces

destinations int type: interface
destination int: <public>

packet type FC out
protocol tcp
src port 1024-65535
dest. port 510

src addr type: host
src ip address: <public ip address>
dest addr type: any address


Filter Two:

source interface type: interface
source interface: <public>

destinations int type: interface
destination int: all interfaces

packet type FC out
protocol tcp
src port 510
dest. port 1024-65535

src addr type: any address

dest addr type: host
dest IP address <public ip address>