We moved a BM3.6 server to new hardware and this application stopped
working
while filters are up after the move.



Setup

ISP->PUBLICIP 12.xx.xx.100 ->Netopia->PrivateIP 192.168.1.1->DMZ
Switch->PRivateIP 192.168.1.2

->BorderPubINT -> 1XX.XXX.XX.25 ->BorderPrivINT -> 1XX.XXX.XX.XXX
RegisteredIP Addresses

on PrivateLAN.



IP address 1XX.XX5.X1.203 - ports 4700, 6100 and 6000 must be opened.
Port 4700 - Security Server

Port 6100 - LR IN Server

Port 6000 - LR OUT Server



IP address 1XX.XX5.X1.33 - port 4601

Port 4601 - Image Server



I have tried numerous filter combinations including statefull filters.
Even
tried setting up

a generic proxy filter in ACL. I do not have the filters committed to
memory
for me to

list here.



I will be going back on site Tues or Weds and would appreciate if
someone
could post what

they think the filters should be so that I can compare.



Will be upgrading to 3.8 after the first of the year.



Thanx,