Hi!

What means 'Removed1 rule from "Exceptions" list' &
'Dynamic rule from "Exceptions" list' in the 'Set FILTER DEBUG = ON'
(T1.ncf procedure), see the followings:

************************************************** ***************************


Removed1 rule from "Exceptions" list

Protocol Type=(TCP)

Source Interface Type=(Any) Destination Interface
Type=(BOARD_NETWORK)
Source Address=(64.12.174.121) Destination Address=(81.218.128.84)

Source Interface Number=(2) Destination Interface Number=(2)

Source Port Range=(80-80) Destination Port
Range=(4220-4220)
Source TOS=(HTTP) Destination TOS=(Dynamic)

Source Group Name=(None) Destination Group Name=(None)

Source Group ID=(0) Destination Group ID=(0)

Source Remote System ID=(None) Destination Remote System ID=(None)

Source Circuit=(14277) Destination Circuit=(14277)

************************************************** ****************************


Dynamic rule from "Exceptions" list

Protocol Type=(TCP)

Source Interface Type=(Any) Destination Interface
Type=(BOARD_NETWORK)
Source Address=(64.236.46.15) Destination Address=(81.218.128.84)

Source Interface Number=(2) Destination Interface Number=(2)

Source Port Range=(80-80) Destination Port
Range=(4219-4219)
Source TOS=(HTTP) Destination TOS=(Dynamic)

Source Group Name=(None) Destination Group Name=(None)

Source Group ID=(0) Destination Group ID=(0)

Source Remote System ID=(None) Destination Remote System ID=(None)

Source Circuit=(14277) Destination Circuit=(14277)

************************************************** ****************************


TIA

Nanu