I already have the san connected via FC using a qlogic 2300. I have an existing array and a local drive. I want to add a second array. I create a 2nd array on the SAN and set it to LUN1.

For the life of me, I cannot get the NW 6.5 sp5 server to see it. on the server I run a scan all, and then load up NSSMU - devices -> scan and all I ever see is the array on LUN0 and the internal drive.

How can I get the server to recognize the 2nd array?

In the startup.ncf, I have 2 FC controllers that are loaded with...
SET MULTI-PATH SUPPORT = ON
LOAD QL2x00.HAM /LUNS /SLOT=1 /ALLPATHS /PORTNAMES
LOAD QL2x00.HAM /LUNS /SLOT=2 /ALLPATHS /PORTNAMES

Any help would be greatly appreciated!