I currently have a HTTP Acceleration/Reverse proxy set up on my BM
3.8.4 server (NW 6.5 sp5). It is has a secondary bind on the nic with
it's own Public IP address. I want to lock it down to where it can
only come in from one specific IP address. To do that I believe I have
to set up a filter to pass traffic. This is my thought.

so what i"ll look at is



Create a filter for HTTP with TCP as the protocol

Since the reverse proxy is set for a specific port do I use any port or
the configured port (for example if I use 8089 for the reverse proxy).

Source is the ISP IP address

Destination is our secondary public IP.

From there the reverse proxy picks it up correct

Is this correct?