Hi Forums

I just enabled DHCP on an OES2-SP1 via the OES Install and Configuration
Icon on the Server.

Then configured the DHCP via the Java Console and everything looks allright

But when i start it i get this error:

480vfs2:~ # rcnovell-dhcpd start
Starting DHCP server Internet Systems Consortium DHCP Server V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Wrote 0 leases to leases file.

No subnet declaration for eth0 (
** Ignoring requests on eth0. If this is not what
you want, please write a subnet declaration
in your dhcpd.conf file for the network segment
to which interface eth0 is attached. **

Not configured to listen on any interfaces!

I have looked in /etc/sysconfig/dhcpd and it has a line like:

# Interface(s) for the DHCP server to listen on.
# Instead of the interface name, the name of its configuration can be given.
# If the configuration file is named
# /etc/sysconfig/network/ifcfg-eth-id-00:50:fc:e4:f2:65
# then id-00:50:fc:e4:f2:65 would be suitable to identify the configuration.
# Examples: DHCPD_INTERFACE="eth0"
# DHCPD_INTERFACE="eth0 eth1 eth2 tr0 wlan0"
# DHCPD_INTERFACE="internal0 internal1"
# DHCPD_INTERFACE="id-00:50:fc:e4:f2:65 id-00:a0:24:cb:cc:5c

I have another server that works just fine and the conf files seems
similar. So i guess something went wrong in the initial confi/setup.

Any ideas would be great

- Michael