Hello all!

We've got new servers HP blade BL460c G6, and Ive found, that Qlogic driver is not loaded, and Netware 6.5, installed on it, cannot see FC adapters (and storage, of course).

In the same enclosure I have 4 BL460c G5 servers, which works with FC very well (Netware 6.5 SP7). I've upgraded newly installed server to SP8, and I've added QL2X00.HAM strings to startup.ncf to make it same with older working servers - this strings were missed. But result is zero.

I've checked HP drivers side, but there are NO FC/HBA drivers for Netware...

Can anybody suggest something helpful?

P.S. From mesanine switch side - there is no connection also, it cannot see blade adapter...