I have my Bordermanager server setup as a router between my private
Network and my hardware firewall. One NIC is configured for my internal
network and the external nic has a private IP in the same Subnet as the
firewall. All routing tables on the bordermanger server are static.
Everything works great until I load the proxy. Once loaded users outside
my network can no longer access my webserver, email server, etc.. These
services are all on the private side on my Bordermanager server. All
routing is setup approprietly because everything works fine until I load
proxy. Packet filters are not enabled on the server. All traffic
entering and leaving the network must be routed by the Bordermanager
Any suggestions are appreciated.