Hi,

Had a solid tunnel setup and then it dropped:
WED JUL 14 13:40:03 2010 INFO :: Quick Mode completed with message ID(0x506f7528)
WED JUL 14 15:28:26 2010 INFO :: Initiator SPD selectors received: IP SUBNET, 10.30.0.0, mask 16 proto 0, port 0
WED JUL 14 15:28:26 2010 INFO :: Responder SPD selectors received: IP SUBNET, 10.31.1.0, mask 24 proto 0, port 0
WED JUL 14 15:28:26 2010 INFO :: IKE phase-II Started with message ID (0x619afefb)
WED JUL 14 15:28:26 2010 INFO :: Initiator SPD selectors received: IP SUBNET, 10.30.0.0, mask 16 proto 0, port 0
WED JUL 14 15:28:26 2010 INFO :: Responder SPD selectors received: IP SUBNET, 10.31.1.0, mask 24 proto 0, port 0
WED JUL 14 15:28:26 2010 INFO :: IKE phase-II Started with message ID (0xfab7216)
WED JUL 14 15:28:26 2010 INFO :: Deleting the IsakmpSA.

Checking the Netgear VPN status it showed phase 1 as idle and phases 2 as connected. Checking Novell Remote Manager VPN monitoring it also showed the connection as up. I have them both setup as intiate and respond. Is there a way I can get them to recognize the connection dropped and re-setup? To get them going I had to drop and reload IKE on the BM server.

Thanks,

Will