I'm just looking for some help regarding an issue I am having with PXE.

We have a number of SLES 10 SP3 / OES2 SP2a servers in our organization with two (2) nics installed. The first nic (for site # one) has two (2) addresses defined ( and and a subnet for each ( and The second nic (for site # two) has one (1) address defined - and a subnet ( as well. Each nic is for a seperate physical location.

I originally had problems getting DHPC working but it seems fine now after ensuring both nics (interfaces) were defined in etc/sysconfig/dhcpd. Unfortunately PXE is working for first nic only Workstations at second site on the second nic (IP and subnet receive the message: PXE-E53: No boot filename received. We have addded an IP HELPER address to the router at the second site but it still doesn't work. In fact I'm not even sure if we put in the correct address for a helper. We just migrated from Netware 6.5 SP8 to SLE10 SP3 / OES2 SP2a and PXE was working fine with Netware (and easy to get working).

Any thoughts or ideas would be greatly appreciated