Dear all,

I have a test case disabling all paths and enabling them 30s later on switch. I assumed the pool on NW6.5 SP8 should wait a moment, at least 60, and then be deactivated. Actually the pool is deactivated immediately, about 8s later.
I have tuned the timeout of QlogicHBA and SCSI by below parameters on STARTUP.NCF:

LOAD QL2X00.HAM SLOT=201 /LUNS /ALLPATHS /PORTNAMES /XRETRY=12 /XTIMEOUT=120
LOAD QL2X00.HAM SLOT=202 /LUNS /ALLPATHS /PORTNAMES /XRETRY=12 /XTIMEOUT=120

LOAD SCSIHD.CDM /RETRIES=8 (which means SCSI timeout is 40+8*11=128seconds)

Could any body throw any hint on this issue?
Thanks in advance.

BTW, I have enabled Multipath and its timeout is 60.