We have a NetWare 6.5 SP7 server that had 2 out of 4 drives fail. The drives in slot 0 and 1 both failed. After many reboots, it will read enough of the drives to boot up, but after a couple of minutes it reads them both as failing, dismounts the volumes and shuts down directory services. I have tried replacing the drive in slot 1, but 4 other drives give me the fail message. I can't replace the drive in slot 0 without the other 3 drives functioning properly. Does anybody have any ideas what to do about this without losing data? I'm not sure that there is a current backup, so we would want to pull the data off of these drives somehow, if we were to bring up a completely different server. Thanks.