Hi folks,

I'm running an SLES 10.3 server with OES2sp2, and attempting to connect to a Netgear NAS devices using iSCSI. I have the services turned on the NAS, and when I use the iscsadmin command it discovers the volumes:

cds-projarchive:~ # iscsiadm --mode discovery --type st --portal 192.168.0.65
192.168.0.65:3260,1 iqn.2010-2.BlueAshNAS01:archivestore
192.168.0.65:3260,1 iqn.2010-2.BlueAshNAS01:ifoldervol

but when I attampt to login to the node I get the following errors:

cds-projarchive:~ # iscsiadm -m node -n iqn.2012-2.BlueAshNAS01:archivestore --login
Logging in to [iface: default, target: iqn.2010-2.BlueAshNAS01:archivestore, portal: 192.168.0.65,3260]
Logging in to [iface: default, target: iqn.2010-2.BlueAshNAS01:ifoldervol, portal: 192.168.0.65,3260]
iscsiadm: Could not login to [iface: default, target: iqn.2010-2.BlueAshNAS01:archivestore, portal: 192.168.0.65,3260]:
iscsiadm: initiator reported error (5 - encountered iSCSI login failure)
iscsiadm: Could not login to [iface: default, target: iqn.2010-2.BlueAshNAS01:ifoldervol, portal: 192.168.0.65,3260]:
iscsiadm: initiator reported error (5 - encountered iSCSI login failure)

I've checked that /etc/iscsi.conf contains the settings to enable CHAP authentication and place what should be the correct passwords for the access to the device in the file. Any other thoughts about why I can't acces this storage device?

Thanks!
Bill