Hi,

One of our client decided to connect one of their OES 6.5 server to the HP EVA 5000 SAN storage. A single QLogin fibre card installed in the server and connected to the FC switch. There is an amber light on the card while the server is steady ON but there is no connectivity. The driver for the adapter located and loaded successfully. Here is what the startup.cfg file looks like:

LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD IDECD.CDM
LOAD SCSIHD.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10006
LOAD IPSRAID.HAM SLOT=2
LOAD QL2X00.HAM SLOT=4 /LUNS
######## End HAM Drivers ########

When I run LIST DEVICES from a server prompt, I get the following list:

0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
0x0004: [V025-A1-D0:0] TEAC CD-224E f/w:2.9B [CD]
0x0006: [V2D1-A2-D8:0] IBM RAID f/w:1 [HDD]

When I run LIST ADAPTERS STORAGE, I ger the following list:

0x00 [V024-A0] Legacy FLOPPY Controller [slot 0]
0x01 [V024-A0-D1:0] Legacy Floppy
0x02 [V100-A100] USB OHCI Controller [slot 0]
0x03 [V025-A1] Novell IDE/ATA/ATAPI/SATA Host Adapter Module [slot 0]
0x04 [V025-A1-D0:0] TEAC CD-224E f/w:2.9B
0x05 [V2D1-A2] IPSRAID-HAM [slot 2]
0x06 [V2D1-A2-D8:0] IBM RAID f/w:1
0x11 [V599-A3] QL2X00.HAM on QLA2340 [slot 4]

Thank you for taking time to read my posted thread and would really appreciate your help.

I am sure somewhere there is something missing in my troubleshooting process or in the way it is configured.

Thank you again and looking forward hearing from you.