Heads Up:

Doing a manual install of NOWS SBE using the standard SLES 10 SP3 and OES 2 SP3 Media.

The internal raid (RAID 1+0) which is called
Smart Array B110i SATA RAID is not working.

SLES 10 SP3 with out using a driver disks, see each disk as a device /sda1 and /sdb1 and not the one logical drive.

Fireware Updates etc
Found a USB floppy drive and used the only disk image HP have during the install this makes it worst and gives you a "No hard disk storage error"

Got a SR open with Novell.

HP at present are being unhelpful, the server is listed on the
Novell support on HP Proliant Servers

Will keep you posted.