I have an existing BM 3.6 SP1A Master server serving two slaves.
Slave
one is a BM 3.7 FP3B and the other BM 3.6 SPIA. Everything is
running.

I wish to install a new BM 3.7 FP3B as the Master Server. I have
installed the new BM 3.7 master server into it's own OU of the tree
with a
new Public IP address that is different from the original BM 3.6 SP1A

Master.

I thought I would be able to remove the slaves from the old BM 3.6 and
re-
install them into the BM 3.7. The new BM Server and old BM slaves can

ping each other. When I attach the old Slave to the new BM 3.7 server
I
cannot establish a connection.

Questions.

1. Can I have two BM VPN servers in different OU's with different VPN

tunnels?
2. Shouldn't I be able to move them from one VPN to another?
3. Method for removal is to remove the slave from NWADMIN first and
then
remove the VPN from the slave using VPNCFG. Do I have to re-boot the

server after removal? Slave and Master?
4. I have used BRDCFG and VPNCFG to create the filters on the new BM
3.7
Master and still no connection.

Any help would be appreciated.

Thanks

Rick