I have just completed an upgrade from SLES 9 OES 1 to SLES 10 sp3 OES2 sp3. Everything went ok except the nss pool is not displayed and the 2 nss volumes are not mounting.

Running fdisk -l /dev/sdb displays

Disk /dev/sdb: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 1 1045 8385899 65 Novell Netware 386

The messages log shows

Mar 29 15:30:30 servername kernel: device-mapper: table: device 253:2 too small for target
Mar 29 15:30:30 servername kernel: device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
Mar 29 15:30:30 servername kernel: device-mapper: ioctl: error adding target to table
Mar 29 15:30:30 servername kernel: device-mapper: table: device 253:2 too small for target
Mar 29 15:30:30 servername kernel: device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
Mar 29 15:30:30 servername kernel: device-mapper: ioctl: error adding target to table

No pools or volumes shows up in nssmu or imanager. Looked at TID 7003844 and talks about running listpart32. Does anyone know where I can get a copy of this utility?