I am having trouble getting Client to Site working through a Cisco PIX
firewall. I have opened up all the relevent ports and it connect and
authenticates fine.

The problem I am have is, I get no IP traffic comming in to the VPN
client. I cannot ping or connect to any servers on the other side. I even
opened up access to and from the VPN servers public IP.

I can connect to other VPNs over the PIX with IPSEC, PPTP, L2TP and it
works fine.

I know the VPN works because I can connect it without a PIX in the way.

Using BM 3.8 SP1 on Netware 6.5SP1
Cisco PIX 520 PIXOS 6.3