I have a fresh install of SLES 11 with ZCM 11. DHCP is done by a separate OES DHCP server. We have only one lan: no subnets, no vlan no wlan, no routers. All servers and workstations are behind the same firewall. Firewalls on both the Zenworks server and DHCP server are off.

When workstations use PXE to boot, I get the error:

PXE-E53: No boot filename received

It looks like the device never got an IP from anywhere.

When I checked the status of novell-proxydhcp, I get the following:

zen:/etc/init.d # novell-proxydhcp status
If 'novell-proxydhcp' is not a typo you can run the following command to lookup the package that contains the binary:
command-not-found novell-proxydhcp
bash: novell-proxydhcp: command not found


Also, when I attempt to automatically load novell-proxydhcp I get the following:

zen:/etc/init.d # chkconfig novell-proxydhcp on
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script sybase-asa is broken: incomplete LSB comment.
insserv: missing `Provides:' entry: please add.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script sybase-asa is broken: incomplete LSB comment.
insserv: missing `Provides:' entry: please add.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script sybase-asa is broken: incomplete LSB comment.
insserv: missing `Provides:' entry: please add.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script sybase-asa is broken: incomplete LSB comment.
insserv: missing `Provides:' entry: please add.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script jexec is broken: incomplete LSB comment.
insserv: missing `Required-Stop:' entry: please add even if empty.
insserv: Script sybase-asa is broken: incomplete LSB comment.
insserv: missing `Provides:' entry: please add.


We were using ZfD 7. For testing the new system, I completely shut down the old Zen 7 server. When the old Zen 7 server is operating, (even with the new ZCM 11 server running) PXE runs great- device gets an IP, points to Zen 7 server, can access imaging menu, all is good.

I am really scratching my head on this one. Any ideas?