I have a Netware 6.5 SP7 server that we are trying to add space.

It is running on a ProLiant BL460c G1 blade with a QLogic QMH2462 4Gb FC HBA Mezzanine card. My SAN team has expanded the LUN from 1.5TB to 1.75TB but I do not see the additional space on the server. I have rebooted the server twice now. When I go into nssmu and try to create the new partition I do not see the free 250GB of space. Is their a limit on the number of NSS partitions I can have on one device, there is 4 there now. When I look at the device in NSSMU it only shows 1500.00GB capacity. Is there some command that I need to run to get it to do a refresh or rescan that a reboot did not do?

I have the latest Qlogic QL2X00.HAM drivers that I could find dated Dec 8, 2006. The SAN is an EMC Clariion.

Here are my startup.ncf file

LOAD ACPIDRV.PSM
######## End PSM Drivers ########
#LOAD CPQSHD.CDM
######## End CDM Drivers ########
LOAD POWPATH.CDM
LOAD HPQCISS.HAM SLOT=10038
LOAD QL2X00.HAM SLOT=101 /LUNS /ALLPATHS /PORTNAMES /QUALIFIED
LOAD QL2X00.HAM SLOT=102 /LUNS /ALLPATHS /PORTNAMES /QUALIFIED
######## End HAM Drivers ########

Thanks

- jason