high

since one month (i guess) i have on some workstations (but not all) a failure on the Discover Applicable Updates on our
Windows 7 SP1 workstations...
the bundle is the Discover Applicable Updates Windows-x86-de-WIN7sp1

the log shows following messages on the workstation

[DEBUG] [10/07/2011 08:48:19.747] [1444] [ZenworksWindowsService] [4] [] [Patch Module] [] [Analyze returned an error code of : -1073741819] [] []
[ERROR] [10/07/2011 08:48:19.778] [1444] [ZenworksWindowsService] [4] [oes] [BundleManager] [Der Analysevorgang wurde nicht korrekt abgeschlossen.] [] [] [db839e3fd25fe291d679aea4ee77035c]
[DEBUG] [10/07/2011 08:48:19.794] [1444] [ZenworksWindowsService] [4] [] [AppScheduler] [] [Exception calling semaphore.Release() for launch schedule. msg = Das Hinzufügen der angegebenen Anzahl zum Semaphor würde dazu führen, dass er seine maximale Anzahl überschreitet.] [] []

....i try to translate the german parts:

Der Analysevorgang wurde nicht korrekt abgeschlossen = the analyse process could endet not correctly
Das Hinzufügen der angegebenen Anzahl zum Semaphor würde dazu führen, dass er seine maximale Anzahl überschreitet = to add the defined account to the semaphor would
exceed the maximum count.

this process trys about 5 times....every day....

ZCM Server is version 10.3.3 on SLES, workstations are also 10.3.3.44626. i changed nothing on the client side....but im not shure, if i have this, since i
activated the ZPM.

thanks

Sascha