Hello,
i have some strange behaivours with multiple traffic rules:

My Bordermanager Servers are running with the following patch levels:
nw 6.5 sp3
bm38 sp3

vpn client 3.8.9

C2s Connection via Broadband (DSL with NAT):

-In Traffic Rules the user is assoziated to 2 TrafficRules (2 different Ip Network)
The user is able to connect to both of this protected ip networks

-If the user is associated to the 3rd ip network (additional rule in the tab traffic rules)
The user can no longer log in via the vpn client .... blinking .. authentication in progress
IF the user is removed from the 3rd rule.... the other 2 networks are normally working.


C2s Connection via Analog Modem through different isp's:

-In Traffic Rules the user is assoziated to 2 TrafficRules (2 different Ip Network)
User can access only one network. If a connection to the 2nd network occours both networks are inaccessable.

-If the user is associated to the 3rd ip network (additional rule in the tab traffic rules)
The user can no longer log in via the vpn client .... blinking .. authentication in progress



Do you have any idea ?

Stefan