We have a New NW 6.5 SP3 file server, and BM 3.8 SP3.
We are trying to get C2S VPN to work properly.
We have one machine that has a real world IP address attached to it. In our testing lab we are using another BM 3.8 Server with Dynamic Nat only. This is what we see when we are concceting to the Customers VPN.

Connected Node Connected Name Key Management type Connection
65.240.26.xxx xxxxxxx IKE Client

This connection is the one using the real world IP address. It connects to the VPN in about 15 seconds, we are able to ping the network login to the services and have a basically soild network connection.

When we attempt to connect through the Test BM to the same Customer VPN site this is what we receive

Connected Node Connected Name Key Management type Connection
65.240.26.xxx xxxxxxx Nated IKE Client


This connection will usually time out after about 3:00 Minutes. We are unable to browse the Network or ping any addresses. We are able to get connected to the VPN itself just none of the services on the NW server itself or as I say can't even login.

We have patched both the NW server and the BM server to the latest patches(as of last week). We attempted this one time before and were able to get it to work with no issues. However this time it seems to be back to the drawing board. Would anyone have ideas of where we could start to look. The server that currently runs BM is a SBS server with several items running upon it. Thank you for any help that you can offer.

DS