NW6.5SP3 server which is network boundary. Has two NICS (public and
private). NAT on Public (Static and dynamic) for groupwise. Trying to get
BM3.8SP3 C2S to work on primary Public IPaddress (secondary used for

Problem: VPN Client can connect to the VPN tunnel (it gets the tree and
server names) but there is no connection to the private network. I have
checked the filters, rules and looked through the TID's. Looks like a
routing issue (client statistics only shows a count for unencrypted
traffic). I know NAT may be causing the issue and routing traffic out onto
the internet instead of back into the tunnel. Can anyone suggest how I can
get this working?

All IP networks are different Client on (, Server
on (, VPTunnel address, Pool

Many thanks