We are trying to get a legacy S2S VPN up between a BM3.7 VPN master and a
BM3.8 slave. Our master location uses a network and our slave
location is using a netwaork. We have set the masters tunnel
address to and the slaves tunnel address We are
using as the subnet mask on all networks. Should we be able
to get them to connect and pass traffic? We had a similar setup to a
former location, and it functioned, but it always had problems configuring
the slave location when veiwing the status in NWADMIN32.

Are trying to do something that is wrong?

Thanks and have a great day!