Hi,

I'm trying to set up C2S VPN between a BM 3.8 and the BM VPN client.
I followed Craig Johnson's book, but the client does not connect.
I tested the same with NMAS and that is working.

The Audit Log on the VPN Monitoring screen of Remote manager shows (opposite
order)

IKE Received MM ID type: 3 protocol: 0 portnum: 0 length: 25
VPN control VPN ACLCheck - No match found in member list
IKE Received notify message of type IPSEC_Contact 24578 from
<client-ip>
VPN control Client <subjectname> added to IPSEC
IKE Failed to create IKE SA - Received the message in the
wrong state. Lost
our reply cookies my-his: xxxxxxx-yyyyyyy dst:
<client-ip> src: <bm public-ip>
IKE Failed to create IKE SA - Received the message in the
wrong state. Lost
our reply cookies my-his: xxxxxxx-yyyyyyy dst:
<client-ip> src: <bm public-ip>
IKE Final IKE SA (phase 1) lifetime = 28800 secs
IKE IKE was created successfully with <client-ip> encr = 3DES,
SA lifetime = 28800 sec
IKE Failed to create IKE SA - Received the message in the
wrong state. Lost
our reply cookies my-his: xxxxxxx-yyyyyyy dst:
<client-ip> src: <bm public-ip>
IKE IKE SA NEGOTIATION - Peer lifetime is 28800 My lifetime is
57600

Please help.
Thanks,
Bert.