I have a customer that has three NW 6.5 SP8 servers with Qlogic HBAs
going through two Brocade switches to a Compellent SAN. Failover is not
working, server either abends or hangs. Here's the startup.ncf;

Set multi-path support=on
LOAD ACPIDRV.PSM

LOAD IDECD.CDM
LOAD SCSIHD.CDM RETRIES=3 RETRYDELAY=20 AEN DEBUG TOFACTOR=4

LOAD QL2X00.HAM SLOT=201 /LUNS /ALLPATHS /ALLPORTS /LINKDOWN=30
/PORTDOWN=60 /LOGINRETRY=60 /igncfg
LOAD QL2X00.HAM SLOT=202 /LUNS /ALLPATHS /ALLPORTS /LINKDOWN=30
/PORTDOWN=60 /LOGINRETRY=60 /igncfg
LOAD IDEATA.HAM SLOT=10034
LOAD IDEATA.HAM SLOT=10042

It's been a while since I've used Netware but to me the startup.ncf
looks to have all the correct switches. Curious on what others are
using in their startup.ncf.

Ted Novak
TRA#5512