Hi,

I have set up a Cisco 877 to run a S2S vpn to my BM 3.8sp4 ir3 server.
I however appear to be unable to get the tunnel up...

The only thing that I can see that is wrong is that it thinks a packet
'could have corrupted'. And BM eventually times out on retrying to
resend the packet. Any ideas?

Cheers,
Scott

4-28-2006 9:17:14 pm Final IKE (phase 1) SA lifetime is 86400 secs
4-28-2006 9:17:14 pm IKE-SA is created. rekey time = 82080
encr=5,hash=2,auth=1,lifesec=86400
4-28-2006 9:17:14 pm dst=<ipaddress>,time=3577856
4-28-2006 9:17:14 pm *Sending proxy ID type 4 0.0.0.0/0.0.0.0
4-28-2006 9:17:14 pm *Sending proxy ID type 4 0.0.0.0/0.0.0.0
4-28-2006 9:17:14 pm ***Send Quick Mode message to <ipaddress>
4-28-2006 9:17:14 pm
I-COOKIE=355B6744ADC53CD1,R-COOKIE=4D6FDCE4CB782448,MsgID=CBA57627,1stPL
=HASH-PAYLOAD,state=-1978942564
4-28-2006 9:17:14 pm ***Receive Unacknowledge Informational message
from <ipaddress>
4-28-2006 9:17:14 pm
I-COOKIE=355B6744ADC53CD1,R-COOKIE=4D6FDCE4CB782448,MsgID=75182932,1stPL
=HASH-PAYLOAD,state=-1978942564
4-28-2006 9:17:14 pm Recieved notify message type 14 from <ipaddress>
4-28-2006 9:17:14 pm Notify Recvd :Packet could have corrupted on the
way ,retransmit to <ipaddress>