This is not device specific.

Satellite Server is SLES 11.1 x64, Zenworks 11.1a

In ZCC the satellite server and primary server are set to accept CTRL+ALT to enter the Zenworks imaging menu. This happened after updating from 10.3.3 to 11.1a. The satellite server is on 11.1a, had to uninstall 10.3.3 and then install 11.1a manually. One site with one satellite server hosting PXE services and DHCP is having this problem. I get this from the log file on the satellite server's "novell-zmgprebootpolicy.log."

Received an OPCODE_OPEN_SERVICE packet from 10.1.3.110
Setting protocol version for 10.1.3.110 to 2
The selected port is 49815
Sent an OPCODE_OPEN_SERVICE ACK packet to 10.1.3.110
Thread started for 10.1.3.110
Received an OPCODE_REQ_CUSTOM_DATA_SIGNATURE packet from 10.1.3.110
Sent an OPCODE_REQ_CUSTOM_DATA_SIGNATURE ACK packet to 10.1.3.110
Received an OPCODE_REQ_PXE_MENU packet from 10.1.3.110
Connecting to Preboot Server at 10.1.0.2
Received OOB error from server 10.1.0.2: 1855
Error receiving data from Preboot Server at 10.1.0.2
Error in getting PXE menu policy
Failed to get PXE menu name file name for 10.1.3.110 (1855)
Imaging License has expired for 10.1.3.110 (1855)
Menu policy: Never
Menu name: pxemenu.txt
New custom data: 0
Referred: 0
Sent an OPCODE_REQ_PXE_MENU ACK packet to 10.1.3.110
Received an OPCODE_REQ_PXE_MENU packet from 10.1.3.110
Connecting to Preboot Server at 10.1.0.2
Received OOB error from server 10.1.0.2: 1855
Error receiving data from Preboot Server at 10.1.0.2
Error in getting PXE menu policy
Failed to get PXE menu name file name for 10.1.3.110 (1855)
Imaging License has expired for 10.1.3.110 (1855)
Menu policy: Never
Menu name: pxemenu.txt
New custom data: 0
Referred: 0
Sent an OPCODE_REQ_PXE_MENU ACK packet to 10.1.3.110
Received an OPCODE_REQ_CFG_NAME packet from 10.1.3.110
Connecting to Preboot Server at 10.1.0.2
Received OOB error from server 10.1.0.2: 1855
Error receiving data from Preboot Server at 10.1.0.2
Error in getting CFG file
Failed to get CFG file name for 10.1.3.110 (1855)
Work assigned: 0
CFG name:
New custom data: 0
Kernel parms:
Referred: 0 for 10.1.3.110
Sent an OPCODE_REQ_CFG_NAME ACK packet to 10.1.3.110
Received an OPCODE_CLOSE_SERVICE packet from 10.1.3.110
Sent an OPCODE_CLOSE_SERVICE ACK packet to 10.1.3.110
Thread ended time for 10.1.3.110


Menu policy is in the log says "Never" it used to say "Hotkey." Any ideas on how to restore the CTRL+ALT functionality?