Good morning I received a message from my customer stating that he was noticing a long delay with the LUM piece of the installation. When inserting an OES11 server into the tree locally, the LUM process takes about ten minutes, however; when they are inserting a server into the tree across the WAN link it was taking up to two hours and fifteen minutes, this is unacceptable since they are planning on inserting up to 50 servers, and this slow down will hinder them from proceeding forward. The main question is that is there anything different that they could be doing to speed up this process? Also the customer made mention of an issue that used to be seen in OES2 and if this is the same issue? Is there any issues with connect to a local LDAP server, or one that is across the WAN link? I have also included the log files that were collected by the customer. Local is in green and the WAN is in red.


2012-02-20 13:13:38 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1667 NovellLum:execute command: namconfig add -u -a 'cn=axxxx,o=bxxx_cxxx,c=ux' -w 'o=sxxxxxs,c=ux' -r 'o=bxxx_cxxx,c=ux' -S 1x.2xx.8x.2xx:389 -l 636 2>&1
2012-02-20 13:13:40 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:589 -------------FixPamServiceConf started---------------
2012-02-20 13:13:40 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:669 -------------FixPamServiceConf ended ret true-----------------
2012-02-20 13:13:42 <1> sles11-oes11-5-mig(8765) [YCP] Service.ycp:287 Running service initscript namcd restart
2012-02-20 13:13:47 <1> sles11-oes11-5-mig(8765) [YCP] Service.ycp:287 Running service initscript sshd restart
2012-02-20 13:13:47 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1804 services ["dbus", "haldaemon"] will be restarted
2012-02-20 13:13:47 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1825 NovellLum:admin context for lum enablement: o=bxxx_cxxx,c=ux
2012-02-20 13:13:48 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1859 NovellLum:execute command: namgroupadd -a 'cn=axxxx,o=bxxx_cxxx,c=ux' -x 'o=bxxx_cxxp,c=ux' -W slxx-oxxxx-5-mig axxxxxxx
2012-02-20 13:16:05 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1881 NovellLum::sleeping 5 seconds
2012-02-20 13:18:28 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1881 NovellLum::sleeping 5 seconds
2012-02-20 13:20:49 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1881 NovellLum::sleeping 5 seconds
2012-02-20 13:20:54 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1888 NovellLum:namgroupadd failed: 1. stdout:
Ids for the domain has already been allocated
. Trying namgroupmod.
2012-02-20 13:20:54 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1890 NovellLum:execute command: namgroupmod -a 'cn=axxxxx,o=bxxx_cxxx,c=ux' -W sxxx-oesxx-x-mig 'cn=axxxxxx,o=bxxx_cxxx,c=ux'
2012-02-20 13:20:54 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1909 NovellLum:execute command: namuseradd -a 'cn=axxxx,o=bxxx_cxxx,c=ux' -x 'o=bxx_cxxx,c=ux' -g 'cn=adxxxxx,o=bxxx_cxxx,c=ux' 'axxxx'
2012-02-20 13:23:11 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1922 NovellLum:namuseradd returned an errorcode. This may be normal if the user already exists: 1. stdout: Error from uamid_allocid: [-1]
Error in set_option: [-1]

Ids for the domain has already been allocated
2012-02-20 13:23:11 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:1924 NovellLum:execute command: namusermod -a 'cn=axxxx,o=bxxx_cxxx,c=us' -g 'cn=axxxxxxx,o=bxxx_cxxx,c=ux' 'cn=axxxx,o=bxxx_cxxx,c=ux'
2012-02-20 13:23:11 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:2092 NovellLum:stopping and starting micasad.
2012-02-20 13:23:11 <1> sles11-oes11-5-mig(8765) [YCP] Service.ycp:468 Stopping service micasad
2012-02-20 13:23:11 <1> sles11-oes11-5-mig(8765) [YCP] Service.ycp:287 Running service initscript micasad stop
2012-02-20 13:23:17 <1> sles11-oes11-5-mig(8765) [YCP] Service.ycp:426 Starting service micasad
2012-02-20 13:23:17 <1> sles11-oes11-5-mig(8765) [YCP] Service.ycp:287 Running service initscript micasad start
2012-02-20 13:23:19 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:2096 NovellLum:sleeping 10 seconds after micasad started.
2012-02-20 13:23:29 <1> sles11-oes11-5-mig(8765) [YCP] NovellLum.ycp:2098 NovellLum:done sleeping 10 seconds.
2012-02-20 13:23:29 <1> sles11-oes11-5-mig(8765) [YCP] clients/novell-lum_auto.ycp:109 NovellLum auto finished


2012-02-21 14:00:17 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1667 NovellLum:execute command: namconfig add -u -a 'cn=axxxxx,o=bxxxx_cxxp,c=ux' -w 'o=Sxxxxx,c=Ux' -r 'o=bxxx_cxxx,c=ux' -S 1x.2xx.8x.2xx:389 -l 636 2>&1 (IP address hidden but it is the same number as they use for the local insertion of servers)
2012-02-21 14:00:18 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:589 -------------FixPamServiceConf started---------------
2012-02-21 14:00:18 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:669 -------------FixPamServiceConf ended ret true-----------------
2012-02-21 14:00:18 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:589 -------------FixPamServiceConf started---------------
2012-02-21 14:00:18 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:669 -------------FixPamServiceConf ended ret true-----------------
2012-02-21 14:00:18 <1> lusinjfs03(10111) [YCP] Service.ycp:287 Running service initscript namcd restart
2012-02-21 14:00:22 <1> lusinjfs03(10111) [YCP] Service.ycp:287 Running service initscript sshd restart
2012-02-21 14:00:22 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1804 services ["dbus", "haldaemon"] will be restarted
2012-02-21 14:00:22 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1825 NovellLum:admin context for lum enablement: o=bxxx_cxxp,c=ux
2012-02-21 14:00:22 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1859 NovellLum:execute command: namgroupadd -a 'cn=axxxx,o=bxxx_cxxx,c=ux' -x 'o=bxxx_cxxx,c=ux' -W xxxxxxx axxxxxxx
2012-02-21 14:35:02 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1881 NovellLum::sleeping 5 seconds
2012-02-21 15:09:33 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1881 NovellLum::sleeping 5 seconds
2012-02-21 15:42:58 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1881 NovellLum::sleeping 5 seconds
2012-02-21 15:43:03 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1888 NovellLum:namgroupadd failed: 1. stdout:
Ids for the domain has already been allocated
. Trying namgroupmod.
2012-02-21 15:43:03 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1890 NovellLum:execute command: namgroupmod -a 'cn=axxxx,o=bxxx_cxxx,c=ux' -W xxxxxx 'cn=xxxxxxx,o=xxxx_cxxx,c=ux'
2012-02-21 15:43:04 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1909 NovellLum:execute command: namuseradd -a 'cn=axxxx,o=bxxx_cxxx,c=ux' -x 'o=bxxx_cxxx,c=ux' -g 'cn=axxxxx,o=bxxx_cxxx,c=ux' 'xxxxx'
2012-02-21 16:16:38 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1922 NovellLum:namuseradd returned an errorcode. This may be normal if the user already exists: 1. stdout: Error from uamid_allocid: [-1]
Error in set_option: [-1]

Ids for the domain has already been allocated
2012-02-21 16:16:38 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:1924 NovellLum:execute command: namusermod -a 'cn=axxxx,o=bxxxx_cxxx,c=ux' -g 'cn=axxxxxxx,o=bxxx_cxxx,c=ux' 'cn=axxxx,o=bxxx_cxxx,c=ux'
2012-02-21 16:16:38 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:2092 NovellLum:stopping and starting micasad.
2012-02-21 16:16:38 <1> lusinjfs03(10111) [YCP] Service.ycp:468 Stopping service micasad
2012-02-21 16:16:38 <1> lusinjfs03(10111) [YCP] Service.ycp:287 Running service initscript micasad stop
2012-02-21 16:16:43 <1> lusinjfs03(10111) [YCP] Service.ycp:426 Starting service micasad
2012-02-21 16:16:43 <1> lusinjfs03(10111) [YCP] Service.ycp:287 Running service initscript micasad start
2012-02-21 16:16:45 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:2096 NovellLum:sleeping 10 seconds after micasad started.
2012-02-21 16:16:55 <1> lusinjfs03(10111) [YCP] NovellLum.ycp:2098 NovellLum:done sleeping 10 seconds.
2012-02-21 16:16:56 <1> lusinjfs03(10111) [YCP] clients/novell-lum_auto.ycp:109 NovellLum auto finished
2012-02-21 16:16:56 <1> lusinjfs03(10111) [YCP] clients/novell-lum_auto.ycp:110 ----------------------------------------
2012-02-21 16:16:56 <1> lusinjfs03(10111) [Interpreter] clients/novell-lum_auto.ycp:110 Called YaST client returned.