we are using ZCM 11.2.1 and have a problem with Imaging/PXE:
We install a new device with ZCM-Imaging and the device reboots.
PXE-boot is always the first boot device. Usually the devices get "no
work to do" from ZCM after reimaging. But in the last days two devices
always start with PXE and get a work-to-do again after they are imaged
and are reimaged again in an endless loop. They seem to get a "work to
do" at each restart. I looked in the loader-messages.log and
server-messages.log but i couldn't find anything which belongs to these
devices. Where can i start to find the error? Both devices ar Dell
Optiplex 980. We have several of these devices but (nearly...) all work
fine. On one device we wiped the hd with "dd if=/dev/zero of=/dev/sda
bs=2048 seek=5 count=1" but this did not help.