Home

Results 1 to 2 of 2

Thread: Software conflict with ZCM Adaptive Agent

Hybrid View

  1. #1
    Join Date
    Feb 2008
    Location
    Walla Walla, Washington, USA
    Posts
    86

    Software conflict with ZCM Adaptive Agent

    Our high school CAD program uses a software package called SolidWorks 2011. WinXP workstations running the ZDM7 agent work fine. When we remove the ZDM agent and install the ZCM11 Adaptive Agent, SolidWorks will not run. If we uninstall the Adaptive Agent, SolidWorks will then run.

    SolidWorks only runs on a workstation if it can talk to a local licensing server. Communication on the server is supposed to be on ports 25734 and 25735. I have done port scans of workstations with the ZDM and ZCM agent installed, and neither one seem to use these ports. When I scan the server, port 25734 responds.

    I don't believe we have a group policy issue, as we use the same Windows group policies on both ZDM and ZCM (we are transitioning from one to the other).

    This sounds to me like some sort of a firewall issue or port conflict, but I cannot seem to figure it out. Ideas? We are getting rather desperate!

    Rick P

  2. #2
    Join Date
    Feb 2008
    Location
    Raleigh, NC
    Posts
    6,663

    Re: Software conflict with ZCM Adaptive Agent

    Can you please email me at craig_d_wilson@yahoo.com on Monday with a
    Email Title about the forums.

    I get lots of junk, so if you send it over the weekend I may not see it.

    On 9/7/2012 1:16 PM, RPummel wrote:
    >
    > Our high school CAD program uses a software package called SolidWorks
    > 2011. WinXP workstations running the ZDM7 agent work fine. When we
    > remove the ZDM agent and install the ZCM11 Adaptive Agent, SolidWorks
    > will not run. If we uninstall the Adaptive Agent, SolidWorks will then
    > run.
    >
    > SolidWorks only runs on a workstation if it can talk to a local
    > licensing server. Communication on the server is supposed to be on ports
    > 25734 and 25735. I have done port scans of workstations with the ZDM and
    > ZCM agent installed, and neither one seem to use these ports. When I
    > scan the server, port 25734 responds.
    >
    > I don't believe we have a group policy issue, as we use the same
    > Windows group policies on both ZDM and ZCM (we are transitioning from
    > one to the other).
    >
    > This sounds to me like some sort of a firewall issue or port conflict,
    > but I cannot seem to figure it out. Ideas? We are getting rather
    > desperate!
    >
    > Rick P
    >
    >



    --
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner

    Novell does not officially monitor these forums.

    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •