ZENworks 11.2 environment.

I've downloaded the LAN driver for Intel 82579LM, e10002-2.1.4.tar.gz.
Compiled the driver module,copied over e1000e.ko to to the extracted initrd
file system. Also added newid="0x8086 0x1502,e1000e" to the append of
z_maint.cfg

Here is the command:

1> General the .ko file:

ohi-zcm-image1:/srv/myInitrd # tar 每xzvf ./e1000e-2.1.4.tar.gz

ohi-zcm-image1:/srv/myInitrd # cd e1000e-2.1.4.tar.gz/src

ohi-zcm-image1:/srv/myInitrd/e1000e-2.1.4/src # make install

ohi-zcm-image1:/srv/myInitrd/e1000e-2.1.4/src # ls e1000e.ko

2> Adding initrd

ohi-zcm-image1:/srv # md myInitrd

ohi-zcm-image1:/srv # cd myInitrd

ohi-zcm-image1:/srv/myInitrd # cp /srv/tftp/boot/initrd initrd

ohi-zcm-image1:/srv/myInitrd # mv /srv/tftp/boot/initrd
/srv/tftp/boot/initrd.bak

ohi-zcm-image1:/srv/myInitrd # mv ./initrd ./initrd.gz

ohi-zcm-image1:/srv/myInitrd # gunzip ./initrd.gz

ohi-zcm-image1:/srv/myInitrd # mkdir work

ohi-zcm-image1:/srv/myInitrd # cd work

ohi-zcm-image1:/srv/myInitrd /work # cpio 每idmuv <../initrd >/dev/null 2>&1

ohi-zcm-image1:/srv/myInitrd /work # cp
/srv/myInitrd/e1000e-2.1.4/src/e1000e.ko
/lib/modules/2.6.16.60-0.83.2-default/initrd

ohi-zcm-image1/srv/myInitrd /work # find . | cpio 每quiet 每o 每H newc >
.../initrd

ohi-zcm-image1:/srv/myInitrd /work # cd ..

ohi-zcm-image1:/srv/myInitrd # gzip 每v9c initrd > initrd.gz

ohi-zcm-image1:/srv/myInitrd # mv initrd.gz initrd

ohi-zcm-image1:/srv/myInitrd # cp ./initrd /srv/tftp/boot/initrd