Hi,

Here is another problem with SSD hard disks : When we activate a bundle of applications at the device boot from the content-repo, we must do a second reboot to installed the bundle. The first startup seems to only associate the bundle to the agent, but it doesn't install it even after several hours. The second reboot, the installation works. I don't have this problem with SATA and IDE hard disks, which automatically assign and install the bundle at the boot device from content-repo. In conclusion, this is not the same problem I posted last week about "importing need reboot twice in ZCM from SSD TID 7011478" This is a new problem and the SSD hard disks seems really problematic in Zenworks environment. I tried Kingston SSD, vertex3, vertex4, many computers like hp6200, lenovo, dell, dq35joe intel... etc etc etc . The new standard of the industry is SSD.


RESUME SSD from content-repo
1- New sysprep installation windows7
2- manuel reboot for registration on zcc the bug 7011478
3- Associate bundles to boot device from zcm
4- Turn ON computer windows (no application installed )
5- Manuel reboot
6- The bundle application is installed
(2 manuel reboot with ssd required)

RESUME SATA/IDE
1- New sysprep installation windows7
2- On zcm the registration is there
3- Associate bundles to boot device from zcm
4- Turn ON computer windows and the bundle is installed from device boot!
NO manuel reboot required!

firmware ssd done
firmware computer done
Zenworks 11.2.2 full path
agent zenworks full path
production problem
labtest problem