Hi there,

I need some clarity on the following please.

I am applying the October 2012 ZENworks Imaging Driver Update.

Before the update all works fine and it goes through the pxe boot process as follows.
Pxe boots fine and I get the pxe menu.
Once I select a menu option it goes through a few checks, usb devices etc.
then Sends the DHCP request and lastly
Loading installation system.....(55392 Kb)
I get the #prompt and can image fine.


After the update which I do by backing up and replacing the following pxe files.
srv/tftp/nvlnbp.sys
srv/tftp/boot/settings.txt
srv/tftp/boot/initrd
srv/tftp/boot/root
srv/tftp/boot/linux

I get the following.

Pxe boots fine and I get the pxe menu.
Once I select a menu option it goes through a few checks, usb devices etc.
then Sends the DHCP request and lastly

Loading installation system.....(15000 Kb) --> This file is a lot smaller.
Where do the above files come from..?
Then I get the #prompt and attempts to start the imaging process crash.

Maybe there is something I am missing in the update.
I did the pxe file updates. Is there anything else that should be updated for the pxe boot to work ?

As soon as I revert back to the old files, I get a complete download of the Installation system.
Thanks