Hi There,

The last few day I updated our ZCM 11.2.4 server with much effort to version 11.3. I assumed that imaging from UEFI notebooks and other UEFI devices would go better (or at all ).
The whole day I have tried all kinds of stuff to get different devices to go to work. With no luck at all.


Device 1:

Asus K56CB notebook.
I tried all kind off setting in the bios (legancy or no legancy) but it doesn't makes a different:
What I see when booting PXE is:


ASUS K56CB


Binary is verified by the vendor certificate
EFI VERSION: 2.31
CLIENT MAC: .
CLIENT IP: 10.1.240.11
SERVER IP : 10.1.3.25

Novell Preboot Execution (PXE) Agent V11.3.0
Copyright Novell, inc. All Rights Reserved

Sending Queries to 10.1.3.25
Contacting Novell Preboot Policy Service Done

Using file: z_auto.cfg
[WDTD]Diskwrite Error: 2

Binary is verified by the vendor certificate
ELILO v3.14 for EFI/x86_64
Loading kernel /efi/x86_64/linux Done
Loading initrd /efi/x86_64/initrd..initrd.c(line 100):read image(/efi/x86_64/initrd) failed: 1

ELILO boot:




After that the notebook reboots in windows.



DEVICES 2:

HP Elitepad 900 G1 Windows 8 Tablet

When booting PXE I see:


Starting PXE IP4 boot:

Network not found.



We have about 15 notebooks from device 1 and 70 from device 2 and all need new software.
In 6 weeks we get 80 other notebooks that are also UEFI devices and need new software.


Why is UEFI more of a problem then the normal BIOS?
Does anybode have any ideas to get this running?


Thanks,

Marcel