I have a server where the DELL UCS-51 SAS has failed.
My drives are mirrored and I can attach 1 to the SATA Onboard
It boots and starts loading Server but then fails to continue on
I edited the STARTUP.NCF and removed the Load LSIMPTNW.HAM Slot=1
and still no full boot up

I reinstalled the defective DELL UCS-51 and was able once to run /poolverify - all checked out with no errors

I need to remove the UCS-51 from Netware 6.5 so I can boot fully from the SATA connection without mirror (until I get it replaced)

Can someone kindly help - with step by step instructions
I know some novell but nothing to make me an Admin

Anyhelp would be greatly appreciated
--Steve