Hi all: I have bonded two NICs on our OES11 DHCP server, specifically eth0 + eth1 -> bond0. The bonding is using 802.3ad and our HP switch is set up for LACP. I have confirmed the bonding is working properly. But I am having a problem with our DHCP server. Upon creating the bonding, dhcpd would throw an error stating it could not use eth0. I edited /etc/sysconf/dhcd file and set: DHCPD_INTERFACE='ANY'.

With that change the dchp daemon now starts without complaint. However, my dhcp clients are not getting dhcp addresses from the server. I have read that dhcp over a bonded interface is OK, but I am not sure this is the case. Suggestions? Thanks for the help, Chris.