Hi,

we upgraded an existing NM2.2 without any problems to NM3, it works fine;
now we decided to run NM3 on a different server, so I'm doing a new install
on this server (SLES 11 SP3) - but it fails. I'm trying to configure LDAP
SSL in exactly the same way as on the working server, but I keep getting
this error on the LDAP server:

2879133440 LDAP: [2015/03/17 17:49:25.697] New TLS connection 0xe89e380 from
x.x.x.x:40903, monitor = 0xae655700, index = 21
2925876992 LDAP: [2015/03/17 17:49:25.697] Monitor 0xae655700 initiating TLS
handshake on connection 0xe89e380
2870712064 LDAP: [2015/03/17 17:49:25.697] (x.x.x.x:40903)(0x0000:0x00)
DoTLSHandshake on connection 0xe89e380
2870712064 LDAP: [2015/03/17 17:49:25.699] (x.x.x.x:40903)(0x0000:0x00) TLS
accept failure 1 on connection 0xe89e380, setting err = -5875. Error stack:
error:1406B0CB:SSL routines:GET_CLIENT_MASTER_KEY:peer error no
cipher
2870712064 LDAP: [2015/03/17 17:49:25.699] (x.x.x.x:40903)(0x0000:0x00) TLS
handshake failed on connection 0xe89e380, err = -5875
2870712064 LDAP: [2015/03/17 17:49:25.699] Server closing connection
0xe89e380, socket error = -5875
2870712064 LDAP: [2015/03/17 17:49:25.699] Connection 0xe89e380 closed

Any ideas?

Thanks,
Mirko