Hi Petri,

>>> On 08.05.2012 at 15:56, petri

vesamaki<petri_vesamaki@no-mx.forums.novell.com> wrote:

> Hello again,
> It seems that the software we should receive the traps from uses SNMPv3
> authentication with SHA algorithm. Is there a way to store the SHA key
> to be used in the SLM?
> We were able to generate SNMPv3 traps without the authentication and it
> seems to work fine. We will try to find out if it's possible to turn off
> the authentication from the software, but it would be preferable if it's
> possible to make SLM accept the authenticated traps.

The SNMP connector can receive SNMP v3 Trap PDUs, but none of the SNMP
features introduced after v1 (reliability, encryption and authentication)
are currently supported.