Home

Results 1 to 7 of 7

Thread: PXE-E74: Bad or missing PXE menu...

Threaded View

  1. #1
    Join Date
    Feb 2008
    Posts
    65

    PXE-E74: Bad or missing PXE menu...

    I have been away from ZCM for a few years and now I have an new job that has ZCM 11 installed and PXE is not working.
    I would not say that I am confident that all is well with in ZCM but it looks that way.

    Test workstation on same segment and switch as the ZCM server
    ZCM server is running on Windows 2008 R2
    DHCP server is on 10.0.0.7
    ZCM server is on 10.0.0.20
    DHCP Proxy running on ZCM
    Procurve switch 5406zl
    in vlan 1 with ip helper address configured for both stand alone DHCP server and the ZCM server

    When attempting to PXE the following is the result

    DHCP IP: 10.0.0.7 PROXY IP: 10.0.0.20
    GATEWAY IP: 10.0.0.1
    PXE-E74: Bad or missing PXE menu and/or prompt information

    Help?
    Last edited by rstout; 16-Jun-2015 at 09:42 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •