Hey guys,

just a quick question:

We have the ZenWorks 11 SP4 with the latest Driver Update . We have a bunch of new Laptops from different vendors (HP, Toshiba).

With the "old" Bios-configuration, the device boots fine into the imaging environment (PXE). But if we set the config to uefi the device hangs on "Sending Query to 10.4.2.154" (our Proxy-DHCP Server). We checked the Proxy-DHCP logs. There are the correct entries:

[DEBUG] [11/04/2015 14:01:00.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [Received packet on 10.4.8.253:67 from relay agent 10.4.8.253] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:00.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [Boot File 64 bit efi/x86_64/nvlnbpx64.efi] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:00.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [DHCP_OFFER sent to 10.4.8.253:67] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:00.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [Received packet on 10.4.8.252:67 from relay agent 10.4.8.252] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:00.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [Boot File 64 bit efi/x86_64/nvlnbpx64.efi] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:00.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [DHCP_OFFER sent to 10.4.8.252:67] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:03.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [Received packet on 10.4.8.253:67 from relay agent 10.4.8.253] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:03.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [DHCP_ACK sent to 10.4.8.253:67] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:03.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [Received packet on 10.4.8.252:67 from relay agent 10.4.8.252] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:03.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [DHCP_ACK sent to 10.4.8.252:67] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:03.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [Received packet on 10.4.8.160:4011] [] [] [] [Imaging]
[DEBUG] [11/04/2015 14:01:03.000] [17403] [zmgtool] [17403] [] [zmgtool] [] [DHCP_ACK sent to 10.4.8.160:4011] [] [] [] [Imaging]
Are there any further necessary configuration changes to do?

thx for your help